Servotecnica 100% operative

Freitag, 28 Februar 2020

www.servotecnica.com

Servotecnica 100% operative

We wish to reassure our customers, suppliers and distributors in relation to the spread of COVID-19, commonly called Coronavirus.

Servotecnica has implemented all the security and prevention measures in compliance with the Ministry and the Region's decree aimed at protecting people: structuring the activity so that, if needed, our staff can work in smart working, evaluating and controlling the visits by outsiders and providing hand sanitization systems in the offices.

Moreover, we are pleased to inform you that the Chinese production sites have resumed their activity and that Servotecnica is 100% operational.

We invite our customers, suppliers, and distributors to contact us to evaluate together alternative solutions in case it is not possible to organize meetings immediately.

As always, full of enthusiasm we are ready to welcome your requests.

italia, francia, germania, spagna, inghilterra, repubblica ceca, irlanda, belgio, austria, svizzera, israele, portogallo, slovenia, bulgaria

SQM Ultra Premium

Dienstag, 02 April 2019

Motore ad elevata efficienza energetica - EMF Motor
italia

Slip Ring miniaturizzati

Mittwoch, 20 März 2019

www.servotecnica.com

Slip Ring con fibra ottica per applicazioni outdoor

Schleifringe werden für die Übertragung von Signalen oder elektrischer Leistung von einer feststehenden auf eine bewegliche Struktur verwendet und erlauben eine kontinuierliche Drehung, wodurch eine Belastung der elektrischen Leiter durch mechanische Verwindung vermieden wird. Die Besonderheit der miniaturisierten Schleifringe aus dem Hause Servotecnica liegt im niedrigen Gewicht und den geringen Abmessungen, ohne dass dabei Abstriche in puncto Zuverlässigkeit, Lebensdauer und Qualität der Übertragung gemacht werden müssen. Ihr Außendurchmesser beträgt bis 5 mm und ihre Übertragungskapazität bis zu 10 unterschiedliche elektrische Signale über Teflondrähte mit Leitern, die mit Silberlegierung plattiert sind, um ihre Signalübertragungskapazität zu erhöhen.

Die Ringe und Bürsten sind aus Goldlegierung; das gewährleistet ein stabiles Signal, Verschleißfestigkeit sowie die Möglichkeit, auch Signale mit hohen Frequenzen (bis 1 GHz) zu übertragen. Um die mechanische Festigkeit einer so kleinen Komponente zu gewährleisten, hat der Schleifring ein Edelstahlgehäuse. Außerdem wurden zwei Kugellager eingebaut, welche die perfekte Ausrichtung zwischen Bürsten und Ringen gewährleisten, um robuste niedrige Drehmomente bei Drehzahlen bis 100 U/min und flüssige Bewegungen sicherzustellen.

Unsere Schleifringe ermöglichen die Signalübertragung auch bei Anwendungen mit besonders geringen Abmessungen. Sie können insbesondere bei Anwendungen wie Roboterarmen, elektrischen Schlössern und Mikrokabeltrommeln eingesetzt werden und haben ein optimales Preis-Leistungs-Verhältnis.

micro slip ring servotecnica
italia, francia, germania, spagna, inghilterra, repubblica ceca, irlanda, belgio, austria, svizzera, israele, portogallo, slovenia, bulgaria

Nuova Serie Access

Sonntag, 17 Februar 2019

Nuova Serie Access
italia

L'encoder più robusto al mondo

Donnerstag, 08 Februar 2018

www.zettlex.com

L'encoder più robusto al mondo
italia

I nuovi PLC Extreme

Mittwoch, 24 Januar 2018

www.lsis.com

Nuovi PLC Serie Extreme by LSIS
italia

Motori Lineari Curvi

Donnerstag, 25 Mai 2017

www.tecnotion.com

Motori Lineari Curvi
italia

Slip Rings per Turbine Eoliche IP65

Montag, 20 Februar 2017

www.servotecnica.com

Slip Rings per Turbine Eoliche IP65
italia, inghilterra, repubblica ceca, irlanda, israele, portogallo, slovenia, bulgaria

Nuovi motori a riduzione magnetica EMF

Mittwoch, 01 Februar 2017

motoriduttore senza riduttore - emf
italia

Tre novità dal mondo JVL

Dienstag, 31 Januar 2017

www.jvl.dk

Tre novità dal mondo JVL - attuatori lineari e motori stepper con freno integrato
italia

Nuovi Slip Rings IP65 Capsule - SVTSA 03 U

Mittwoch, 18 Januar 2017

www.servotecnica.com

Nuovi Slip Rings IP65 Capsule - SVTSA 03 U
italia, francia, inghilterra, belgio

Triton - New micro drive by Ingenia

Montag, 12 Dezember 2016

www.ingeniamc.com

Triton - Il nuovo micro azionamento super potente di Ingenia
Continuous Current 7 ARMS
Peak Current 10 ARMS
Supply Voltage 8-48 VDC
Dimensions 43 x 43 x 15.9 mm
Communications USB, RS232, RS485, CANopen, EtherCAT
Feedback Digital Encoder, SinCos Encoder, Digital Hall, Analog Hall, SSI, DC Tachometer, Analog Input, PWM Encoder
Motor Type DC Brushed, Rotary Brushless, Linear Brushless, Voice Coil
Command Source Network Interface, Standalone, Analog Input, Step and Direction, Encoder Following, Electronic Gearing, PWM
Motion Mode Profile Position, Profile Speed, Profile Torque, Cyclic Sync Position, Cyclic Sync Velocity, Cyclic Sync Torque, Homing, Open Loop Vector, Open Loop Scalar
Enviroment High Temperature, Low Temperature
Digital Inputs 4 TTL
Digital Outputs 4 TTL
Size (W x L) 43 x 43 mm
italia

Nuovi HMI eXP - LSis

Montag, 28 November 2016

www.lsis.com

Nuovi HMI eXP LSis
italia

Neue IP65 Schleifring-Serie für Flow-Pack Verpackungsmaschinen

Montag, 28 November 2016

www.servotecnica.com

Nuovi Slip Rings IP65 per Confezionatrici Flow Pack
Schon seit längerer Zeit legt Servotecnica einen besonderem Fokus auf Anwendungsbereiche bei sogenannten Flow-Pack-Verpackungsmaschinen. Um den Anforderungen dort gerecht zu werden, stellt Servotecnica eine neue Familie von elektrischen Drehverbindern (Schleifringen) vor, die für solche Anwendungen ausgelegt sind.
 
Der neue Schleifring vom Typ SVTS B 03 mit einem IP-Schutz von 65 wurde entwickelt, dass er eine schnelle, kostengünstige und zuverlässige Integration ermöglicht. Er stellt eine Alternative zur aktuellen Baureihe SVTS B dar. Dank der drei Leistungsringe mit je 20A zur Stromversorgung der rotierenden Einheit der Verpackungsmaschine und der zwei Signalringe zur Übertragung von Signalen wie z.B. Temperatursensoren, bietet der Schleifring eine ideale Alternative.
 
Die Hohlwelle mit einem Durchmesser von 22mm erlaubt die Montage dieses Drehübertragers direkt an der Welle. Eine mechanische Anbindung erfolgt problemlos über vier M3-Gewindestifte.
 
Durch Verwendung von Multidrahtbürsten-Technologie und Ringen aus Edelmetalllegierungen bleiben die elektrischen Eigenschaften der zu übertragenden Signale und Leistungen langfristig unverändert erhalten und gewährleisten die gleichen Ergebnisse, wie die aktuellen Übertrager der Baureihe SVTS B.
 
Die Multidrahtbürsten-Technologie verlängert die Lebensdauer des Drehübertragers bis zu etwa 100Mio Umdrehungen. Weiterhin wurde besondere Aufmerksamkeit auf die Verkabelung gelegt, indem die Kabel durch Kabelverschraubungen geführt werden, die dann über Schraubverbinder mit den Bürsten und den Ringen des Schleifrings verbunden sind; alles in allem gewährleistet der Schleifring einen IP65-Schutzgrad.

Das Modell SVTS D IP65 wurde entwickelt, um kurze Montagezeiten und minimale Wartung zu gewährleisten, und das alles bei einem wettbewerbsfähigen Preis-Leistungsverhältnis. 

Dank der Montagefreundlichkeit, dem Preis, der langen Lebensdauer und dem hohen Schutzgrad trägt dieser Schleifring maßgeblich dazu bei, in „Flow-Pack“ Verpackungsmaschinen eine Alternative zu bestehenden Lösungen darzustellen.
italia, francia, germania, spagna, inghilterra, repubblica ceca, irlanda, belgio, austria, svizzera, israele, portogallo, slovenia, bulgaria

Schleifring mit Möglichkeit der Luftübertragung

Freitag, 25 November 2016

www.servotecnica.com

Nuovo Slip Ring con singolo passaggio pneumatico
Immer häufiger sind elektrische Schleifringee gefragt, die auch die Möglichkeit bieten Luft zu übertragen. Typische Anwendungen sind Drehtische, Bearbeitungszentren als auch in der Robotik oder in Leitungsrollsystemen.

Mit der neuen Option „0P1“ und „0P2“ bei Schleifringen vom Typ SVTS C 05 bietet Servotecnica eine Lösung für solche Anforderungen. Dieser Typ basiert auf der Integration eines elektrischen Schleifrings mit einem Innendurchmesser vom 38mm, in dem sich eine einzelne Drehdurchführung für Luft befindet, die Drücke bis zu 1 Mpa / 10 bar übertragen kann - und für Drehzahlen bis zu 300RPM ausgelegt ist.

Diese Schleifringe werden mit Metall-Metall-Technologie gefertigt, d. h. mit Bürsten und Ringen, die mit Silberlegierung beschichtet sind; dies gestattet die störungsfreie Übertragung von elektrischen Signalen und gewährleistet eine Lebensdauer des Schleifrings bis zu 108 Umdrehungen ohne Wartung. Die Anzahl der Leistungskreise variiert von sechs bis zu 24 Leitungen mit einem Strom von bis zu 15A und Spannungen von bis zu 600 VAC/VDC. Es sind 3 Schutzklassen verfügbar, eine Standardversion in IP51 und zwei weitere, respektive IP54 und IP65.

Dieses Angebot von Servotecnica ist an jene Kunden gerichtet, die eine schnelle und betriebsbereite Lösung mit minimalen Lieferzeiten benötigen. Wir sind in der Lage, Ad-hoc-Lösungen zu entwickeln, die über eine höhere Anzahl elektrischer Kontakte verfügen oder die die Übertragung von komplexeren Signalen erfordern, wie Ethernet oder Ethernet/IP Feldbusse mit Durchsatzraten bis zu 1 Gb/s. Außerdem können wir den pneumatischen Teil mit mehreren Durchlässen sowohl für Luft als für Flüssigkeiten oder Gemische individuell anpassen.

Das technische Team von Servotecnica steht immer gern zur Verfügung, um die beste Lösung im Hinblick auf Kosten und Leistungen zu finden und die Bedürfnisse unserer Kunden vollumfänglich zufriedenzustellen.





italia, francia, germania, spagna, inghilterra, repubblica ceca, irlanda, belgio, austria, svizzera, israele, portogallo, slovenia, bulgaria

Schleifring mit Ethernet Kompatibilität

Dienstag, 26 Juli 2016

www.servotecnica.com

Nuovi Slip Rings - Serie Ethernet
Den Bedürfnissen unserer Kunden vorgreifen und immer bereit sein für neue Anforderungen, sind die Herausforderungen von Servotecnica.

Servotecnica bietet nun elektrische Schleifringe an, die Ethernet-Protokolle wie EtherNet/IP, ProfiNet, EtherCAT, Sercos III, PowerLink übertragen können.

Die neuste Generation von gekapselten Schleifringen der Baureihe SVTS A und Hohlwellen-Schleifringen der Baureihe Typ SVTS C05 sind die Antwort auf die wachsende Nachfrage, Hochfrequenzsignale rotativ zu übertragen. Dies ist nun  möglich dank der Gold-Gold-Technologie, d. h. durch eine Goldbeschichtung sowohl der Bürsten als auch der Ringe und der speziellen Innenstruktur, die Störungen und Kopplungen minimiert.

Schleifringe von Servotecnica können mit Ethernet-Signalen vom Typ 100BaseT oder 1000BaseT mit Geschwindigkeitswerten respektive von 100Mb/s und 1Gb/s beaufschlagt werden. Aus diesem Grund sind Schleifringe von Servotecnica mit der Option „E1M“ für die Lösung 100 BASE-T mit zwei verdrillten Zweidrahtleitungen ausgestattet und mit Kabeln der Kategorie CAT5E abgeschirmt, während die Option "E1G" für Gigabit Ethernet Übertragungen mit vier verdrillten Zweidrahtleitungen ausgestattet und mit Kabeln der Kategorie CAT6A abgeschirmt sind.
Dank der Gold-Gold-Technologie kann Servotecnica im gleichen Schleifring sowohl digitale und analoge Signale als auch die Leistungsübertragung anbieten. Bei der Baureihe SVTS A finden bis zu 56 Kreise mit Strömen von 2, 6 und 8A und Spannungen bis zu 240 VCC/AC Platz. Dank reduzierten Durchmessers beträgt die Lebensdauer ungefähr 107 Umdrehungen. Die Schleifringe der Baureihe SVTS C05 haben einen Innendurchmesser von 38,1mm und bieten bis zu 48 Kreisen mit 2A und 15A für die Leistungsübertragung und Spannungen bis zu 600 VCC/AC; außerdem gestattet diese Technologie mit mehrdrahtigen Bürsten eine Lebensdauer von 8x107 Umdrehungen.

Die individuellen Anpassungsmöglichkeiten sind vielfältig. Von der Kabellänge bis zum Schutzgrad von bis zu IP67, den Materialien aus ABS-Kunststoff oder Metall bis hin zu elektrischen Schleifringen mit integriertem Drehdurchführungen für Fluide und Gase, mit dem Merkmal, gleichzeitig Leistung, elektrische, sowie optische Signale über Glasfaser übertragen zu können.
Außerdem bietet Servotecnica Lösungen an, die es gestatten, die Arbeitstemperatur des Schleifrings nach oben oder nach unten zu erweitern.

Explosionsgeschützte Ausführungen mit ATEX-Zertifizierung sind ebenfalls verfügbar.









Zurück zur News-Übersicht.
italia, francia, germania, spagna, inghilterra, repubblica ceca, irlanda, belgio, austria, svizzera, israele, portogallo, slovenia, bulgaria

Nuovo motore closed-loop JVL

Freitag, 08 Juli 2016

www.jvl.dk

Nuovo motore closed-loop JVL
italia

DSTI bei einem Forschungsprojekt für Astrophysik am Süpol dabei

Montag, 04 Juli 2016

www.dsti.com

DSTI bei einem Forschungsprojekt für Astrophysik am Süpol dabei

Die wenigsten Menschen wissen dass weniger als eine Viertel Meile vom Südpol eines der leistungsstärksten Radioteleskope der Welt liegt. Das ganze Jahr über wird damit sehr schwache kosmische Mikrowellenhintergrundstrahlung (CMB) aus dem All empfangen. Die kosmische Mikrowellenhintergrundstrahlung ist das älteste sichtbare Licht im Universum, ein Überbleibsel aus den sehr jungen Jahren unseres Universums das viel heißer und intensiver ist als die Strahlung heutzutage.

BICEP3, die dritte Generation dieser Serie von Teleskopen misst die Polarisierung von CMB und benötigt dabei eine Drehdurchführungstechnologie zur Weiterleitung von sehr reinem Heliumgas von einem Kompressor am Boden zu einem Tiefkühl-Kühler am Teleskop-Gelenk. Obwohl es am Südpol schon sehr kalt, ist muss das Teleskop seine Detektoren auf eine Temperatur nahe des absoluten Nullpunkts (-273C°) bringen, um richtig zu funktionieren.


Während der ersten Generation der BICEP3 Teleskopen an der Amundsen-Scott Station am Südpol verwendete das BICEP3 eine standard Zwei-Kanal DSTI Drehdurchführung. Unglücklicherweise war diese spezielle Drehdurchführung nicht geeignet für diese anspruchsvolle Aufgabe, Helium in hohem Druck, das bekannt für seine hohe Leckage-Eigenschaft ist, zu transportieren.


Durch den hohen Verlust an Helium musste ständig neues Gas ins System gebracht werden. Trotz der hohen Reinheit des Gases kam es immer wieder zur Kontamination des Kühlsystems und dadurch zu Performance-Einbußen die zusätzliches Handeln bedurften, was wiederum zu längeren Ausfallzeiten führte.

Der Forschungswissenschaftler Denis Barkats von der Harvard University tat sich mit DSTI zusammen um das Problem mit einem Vier-Kanal Drehdurchführer von DSTI zu lösen. Die Ergebnisse Vier-Kanal Drehdurchführers übertrafen die Performance der Zwei-Kanal Version um ein Vielfaches wobei die beiden äußeren Kanäle als Puffer für die inneren Kanäle dienen.



DSTI war  außerordentlich reaktionsstark als es um die Kommunikation der Probleme ging, außerdem waren sie in der Lage uns ohne Verzug mit Ersatz-Drehdurchführungen zu beliefern was sehr wichtig für die Zeitplanung im sehr kurzen Sommer am Südpol war“ sagte Denis Barkats.




Zurück zur News-Übersicht.

italia, francia, germania, spagna, repubblica ceca, irlanda, belgio, austria, svizzera, israele, portogallo, slovenia

Slip Rings miniaturizzati - Diametri da 6 e 9 mm

Freitag, 01 Juli 2016

www.servotecnica.com

Slip Rings miniaturizzati - Diametri da 6 e 9 mm
È sempre più richiesta la miniaturizzazione dei component elettrici.

Servotecnica, anticipando le richieste che possano soddisfare queste nuove esigenze, propone dei collettori elettrici da 6 e 9 mm di diametro; non esiste un componente standard ma, come per tutta la gamma dei collettori, anche per queste nuove serie, Servotecnica può fornire un servizio tecnico applicativo in grado di soddisfare le esigenze di personalizzazione andando a creare un prodotto specifico per il Cliente, sia per quanto riguarda il numero di contatti che per tensione di esercizio e velocità di rotazione.

Questi componenti possono trovare spazio nelle applicazioni medicali, nelle telecamere e nei robot, specialmente delle applicazioni per androidi dove il numero di motorizzazioni e il grado di libertà impongono la trasmissione di segnali elettrici anche in parti meccaniche in rotazione.

La copertura delle spazzole e degli anelli con metalli preziosi garantisce il trasferimento sicuro dei segnali elettrici anche di elevata frequenza. Visto il ridotto attrito tra spazzole e anelli ne consegue una riduzione del consumo di materiale, una produzione limitata di polveri con conseguente miglioramento della vita meccanica e della qualità del trasferimento di segnali.

italia

Optimierte Schleifringe für schnelle Datenübertragung

Freitag, 11 März 2016

www.servotecnica.com

 Optimierte Schleifringe für schnelle Datenübertragung

Die Datenraten proprietärer, Ethernet basierter Kommunikation steigen immer weiter. Für Sercos III ist der Standard 100 Mbit/s mit 100 BaseT Ethernet-Kupferleitung. In Rund- und Drehtischanlagen müssen zentrale Drehübertrager neben elektrischer Leistung und Signalen daher auch immer höhere Datenraten störungsfrei auf den rotierenden Teil übertragen. Aus Kostengründen werden bevorzugt klassische Schleifringe mit Edelmetall-Schleifbahnen und Kupferkabel eingesetzt. Drehübertrager für Glasfaser sind Anwendungen mit noch höheren Übertragungsraten beispielsweise für Video-Signale (4K) vorbehalten. An den Auf- und Einbau klassischer Schleifringe stellt dies besondere Anforderungen.

Die gekapselten Schleifringe der Baureihe SRH haben Federbüschel-Abgreifer in Edelmetalllegierung und goldbeschichtete Schleifbahnen. Dies ist die Grundlage sicherer Datenübertragung zusätzlich mit redundantem Abgriff und mehreren Kontaktpunkten für jede Leitung. Der modulare Aufbau bietet dem Anwender viele Kombinationsmöglichkeiten bei der Wahl von Leistungs- und Signalspuren.

Kritisch bei hohen Datenübertragungsraten sind parallel verlaufende Leitungen, die konstruktiv bei den Schleifbahnen unvermeidbar sind. Die Schleifringe der Baureihe SRH sind getestet und bis zu einem Bohrungsdurchmesser von 38 mm von einer unabhängigen Organisation für Sercos III freigegeben.

Schleifringe für Kabel verschiedener Hersteller sind größere Hohlwellendurchmessern erforderlich, hängt die erreichbare Übertragungsrate von verschiedenen Faktoren ab. Unter Kostengesichtspunkten wurde hierbei auf den Einsatz spezieller Elektronik verzichtet. Eine Optimierung durch Verwendung geeigneter Kabel steht hier an erster Stelle. Da die Kabel jeweils andere Durchmesser haben wird der Innen- und Außendurchmesser des Schleifringkörpers konstruktiv angepasst. Bisher sind Schleifringe für folgende Kabel entwickelt worden und in Produktion: 

• Schleifring Srh für Sercos III mit Bosch-Kabel

• Schleifring für Sercos III mit  Schneider-Electric-Kabel

• Schleifring für Profinet mit Siemens-Kabel

Kabellängen und Kabelsicherung können an die jeweiligen Anforderungen angepasst und selbstverständlich mit passenden Steckern fertig konfektioniert werden. Besonders zu erwähnen ist die Hohlwelle dieser Schleifringe, die die Integration oder Kombination kompakter Drehdurchführungen für Flüssigkeiten und Gase erlaubt. Da die Hohlwelle auch im Angebot ist, steht damit eine einsatzfertige Komplettlösung zur Verfügung. Für besondere Einsatz- oder Umgebungsbedingungen bietet Servotecnica auch Baureihen mit Edelstahl- oder Aluminiumgehäuse sowie in höheren Schutzarten an.



Zurück zur News-Übersicht.

germania, austria, svizzera

The New AMP-43740 4-Axis Servo Amplifier

Freitag, 18 Dezember 2015

The New AMP-43740 4-Axis Servo Amplifier
italia

Sercos III Module for MAC00-ESx

Mittwoch, 02 Dezember 2015

Sercos III Module for MAC00-ESx
italia

New-TM18-iron-core-linear-motor-TECNOTION

Montag, 30 November 2015

New-TM18-iron-core-linear-motor-TECNOTION
italia

Zettlex Incoder VIDEO

Donnerstag, 15 Oktober 2015

Zettlex Incoder VIDEO
italia

AMKASMART iSA - Decentralized drives VIDEO

Donnerstag, 15 Oktober 2015

AMKASMART iSA - Decentralized drives VIDEO
italia

Premium high torque motors

Mittwoch, 07 Oktober 2015

Premium high torque motors
italia

PiezoMotor Introduces the Galil Single-Axis Controller DMC-30019, Compatible with Piezo LEGS® Product Line

Dienstag, 15 September 2015

PiezoMotor Introduces the Galil Single-Axis Controller DMC-30019, Compatible with Piezo LEGS® Product Line

PiezoMotor Uppsala AB, leading provider of linear and rotary high end positioning systems, is announcing their latest drive option for the Piezo LEGS® motor series. The new DMC-30019 is a single-axis controller based on architecture from well renowned company Galil Motion Control, Inc.

“Galil makes high end controllers that are widely used within areas like semiconductor, medtech, automation, and research” says Olle Lindkvist, Marketing Manager. “Engineers worldwide can now benefit from familiarity of the Galil control interface when they design systems using piezoelectric motors. The Piezo LEGS® together with the new DMC-30019 gives outstanding performance in high precision applications.” 

The motion controller operates stand-alone or can be networked to a PC via Ethernet. Features include PID compensation with velocity and acceleration feed forward, program memory with multitasking for concurrent execution of four programs, and uncommitted optically isolated inputs and outputs for synchronizing motion with external events. Modes of motion include point-to-point positioning, jogging, contouring, PVT, electronic gearing and electronic cam.

Like all Galil motion controllers, these controllers use a simple, English-like command language which makes them very easy to program. GalilTools software further simplifies system set-up with “one button” servo tuning and real-time display of position and velocity information.

About PiezoMotor AB (www.piezomotor.com)

Swedish high-tech company PiezoMotor AB develops, manufactures and markets cutting-edge micro motors based on patented technology. The company’s products enable extreme miniaturization, precision and energy efficiency.

Small electric motors are used in many industries such as semiconductor equipment manufacturers, optics, telecom, medical technology and defense. PiezoMotor AB sells its products through its own sales force and in cooperation with, among others, the German-American industrial group Faulhaber Group and its global distribution network.

PiezoMotor AB is privately held and financially backed by well-known Swedish, German and American industrial investors.

About Galil Motion Control, Inc. (www.galil.com)

IPrivately held and profitable for over 100 consecutive quarters, Galil Motion Control Inc. was founded in 1983 by Jacob Tal and Wayne Baron. Galil became the first company to produce a microprocessor-based servo motor controller without tachometer feedback. Since then, Galil has continued to advance motion control technology and has found industry-leading acceptance with over 750,000 motion controllers and PLCs successfully installed worldwide. Various applications include machines for the medical, semiconductor, machine tool, food processing, entertainment and textile industries.

italia

NEU : Schleifring SRC032 in Schutzart IP65

Donnerstag, 10 September 2015

www.servotecnica.com

NEU : Schleifring SRC032 in Schutzart IP65

Der Schleifringe SVTS B wurde speziell für die Anwendung in einer Verpackungsmaschine entwickelt. Von dem rotierenden Schweißbalken werden Strom und Signal auf die Maschine übertragen. Der elektrische Anschluß über Steckschuhe erlaubt schnellen Austausch bei Wechsel des Schleifrings.

Die herausragenden Eigenschaften dieses Typs erlaubten eine Verbreitung in immer mehr Anwendungen wie Kleinwindkraft Anlagen oder Karuselle.

Die Anforderung nach einer spritzwassergeschützten Ausführung und Einsatz des kompakten Schleifrings mit 32mm Außendurchmesser im Aussenbereich wurde hier Rechnung getragen.

Der SVTS B ist mit 3 oder 5 Spuren und mit Steckschuh als kostengünstige Lösung erhältlich.



Zurück zur News-Übersicht.

italia, francia, germania, spagna, inghilterra, repubblica ceca, irlanda, belgio, austria, svizzera, israele, portogallo, slovenia, bulgaria

Was sind Drehübertrager?

Montag, 07 September 2015

www.dsti.com

Was sind Drehübertrager?

Eine Drehdurchführung oder ein Drehgelenk sind eine mechanische Einheit um Flüssigkeiten oder Gase (mit Über - oder Unterdruck) von einem festem Eingang in einen rotierenden Ausgang zu übertragen, ohne dass das Medium austreten kann.

Drehdurchführungen, rotative Gelenke, Drehgelenke und Schwenkverschraubungen sind so entwickelt und gebaut dass sie hohe Temperaturbereiche, Drücke und Drehgeschwindigkeiten in unterschiedlichsten Umgebungsbedingungen widerstehen können.

Drehdurchführungen funktionieren normalerweise so dass ein Eingangsmedium über einen speziellen, geschützten Mechanismus auf das Ausgangselement überführt wird. Die Funktionsweise wird im Video unten erläutert.

Drehdurchführungen werden in den unterschiedlichsten Applikationen verwendet und eingesetzt, von "Mini" Drehdurchführungen in der Halbleiterindustrie oder Medizintechnik bis hin zu sehr großen, widerstandsfähigen Einheiten in Industrieanwendungen.



Zurück zur News-Übersicht.

italia, francia, germania, spagna, repubblica ceca, irlanda, belgio, austria, svizzera, israele, portogallo

Explosion proof components - ATEX

Freitag, 28 August 2015

Explosion proof components - ATEX

Many automatic applications and installations must work operate in explosion proof environments.

In this case, all components and equipment have to satisfy the Directive 94/9/EC ATEX requirements in order to avoid possible explosions.

Servotecnica is able to provide different solutions that satisfy this Directive.

SVTM 80B3X - EX

Brushless servomotors with 90mm flange and 3 different lengths able to provide respectively a continuous torque of 1, 2 and 4 Nm.

Certification: ATEX II 2G Exd IIB T4

SR EX 130

Electric Rotary Joints for power, signal as well as fieldbus (100 BaseT Ethernet) transfer from a stationery structure to a continuously rotating one.

Certifiction: ATEX II 2GD Exd IIB IIC T5 Gb

 




Zurück zur News-Übersicht.
italia, francia, germania, spagna, inghilterra, repubblica ceca, irlanda, belgio, austria, svizzera, israele, portogallo, slovenia, bulgaria

Vettura a Propulsione Elettrica SCXV

Freitag, 31 Juli 2015

Vettura a Propulsione Elettrica SCXV
italia

Galil Controller Used in Diagnostic CT Scan Imaging System

Freitag, 29 Mai 2015

Galil Controller Used in Diagnostic CT Scan Imaging System

Galil Controller Used in Diagnostic CT Scan Imaging System to Assess the Structural Integrity of Corrugated Metal Pipe. Corrugated Metal Pipe (CMP) is used in a wide variety of transportation and storm water management settings around North America. The pipes come in all different shapes and sizes for culverts, sewers, gravity drains and the like. CMP is considered a flexible conduit to engineers and as such, is reliant on the surrounding soil for the majority of its structural strength. In other words, CMP sitting on a flatbed truck can be deflected by a human jumping on it, however, properly surrounded with soil, the structure will bear the load of a transport trailer.  As time goes on, these CMP installations need to be assessed to allow for proper maintenance.  In the past, assessments were typically subjective, involving visual appraisals and acoustic assessment tests which can be inconclusive. The more conclusive tests used to be destructive to the actual pipe wall, which would worsen the structural integrity.   Figure shows a BCT scan of a Corrugated Metal Pipe The solution to this problem was developed by Inversa Systems in 2009. The company developed the first CAT scan for infrastructure, known as Backscatter Computed Tomography (BCT), which is used to look through the CMP wall without disturbing the pipe or soil to verify if the pipe is adequately supported. A BCT scan uses backscattered gamma radiation to measure the density of a point in space relative to the adjacent points. A relative map of density is created, producing a picture of the material within the scan field. This provides an accurate, objective, and non-destructive assessment of the structural integrity of CMP and its surrounding soil. With the appropriate structural assessment, maintenance decisions are made accordingly, and rehabilitation efforts can be done at a fraction of the cost of replacing the same asset while avoiding service disruption. Figure shows source collimator and detector array focusing with linear axes providing the BCT scan To accomplish this, Inversa Systems uses Galil's 4-axis DMC-4040 with internal two-phase drives.  Two axes control two linear actuators to complete the scan.  The other two axes control two rotation tables, one is the source collimator, and the other is a detector array.  These two rotation tables work in tandem to provide a scan from both sides of the desired area.  The source collimator will focus the scan deeper and deeper with each successive pass to provide a complete depth analysis of the structure.   As the collimated beam moves through the CMP and into the adjacent soil, it reaches a focal point that the detector collimator is aligned to receive as backscatter.  The radiation count, after some initial discrimination, is sent to the Galil controller.  The DMC-4040 assigns ‘x’ and ‘y’ address information based on the angle that the beam is entering the material and the distance between source and detector.  The combination of count and address information allows for generation of a complete real time image of density, including the metal pipe and material around the pipe.  Lack of density indicates a void space which verifies an unsupported region of pipe. The DMC-4040 presented key features to allow for the high-performance and easy implementation and operation of the BCT scanner.  The controller uses simple ASCII based communication allowing the development of a Windows-based interface to collect and distribute the data, and the integrated LCD screen on the DMC-4040 enhances the benefits of on-site troubleshooting.  Lastly, the fast processing power of the Accelera controllers allows for multiple processes to run effectively in parallel using multi-threading.   With Inversa Systems' pioneering research in bringing the diagnostic capability of a medical CAT scan to infrastructure and Galil's high-performance and cost-effective motion controllers, condition assessment and asset management is possible in a setting once deemed impossible or impractical.

italia

Waterproof and Dustproof Stepper Motor MSW

Montag, 18 Mai 2015

Waterproof and Dustproof Stepper Motor MSW
Birkerød, Denmark--JVL Industri Elektronik now offers a series of NEMA 23, 24, and 34 stepper motors with standard IP67 and optional IP65 protection. These rugged, compact, steppers use rare-earth magnets for high power and cooler running and have a torque range from 1.2Nm (169.9 oz-in.) to 8.2Nm (1161.2 oz-in.) and a high torque-to-inertia ratio for quicker acceleration and deceleration, as well as a high torque-to-mass and torque-to-volume ratio.They feature special IP67 rated seals at the rear end and between stator and flanges, a special Teflon seal around the stainless steel shaft, and leak-proof cable entry provides waterproof sealing. These cost effective motors are designed for harsh and wet environments such as Food processing, pharmaceutical, medical, and chemical industries.
 
Dustproof and waterproof, these steppers can operate in extremely contaminated environments, can be totally immersed in water or cleaning solutions, and washed with high pressure hoses. These efficient 2 phase, 3A to 6A stepper motors (200 step/rev.), with long life bearings, are designed to handle high axial and radial shaft loads. JVL Stepper Motor options include: Custom shafts, Teflon®shaft double seals, stainless steel end bell and flange, built-in encoder, programmable controller, drive, brake, and integral planetary or worm gearheads. A thick protective layer of epoxy as a surface treatment can also be bonded to the motor body.
 
About JVL- JVL is recognized as a leader for its development of efficient and compact integrated motors for VAC and VDC. MAC motor series of integrated VAC servo motors (up to 4500W and 13,5kW peak), and the QuickStep integrated stepper motors (up to 25Nm). Both the servo motor and stepper motor series includes the controller, PLC, encoder, AC power supply and bussystem integrated into one compact unit. All industrial ethernet busses like Profinet, EtherCat, Ethernet IP, Modbus TCP, Powerlink etc. are available.
 
JVL with more than 25 years of motion control experience enjoys a reputation for the development of highly specialized integrated motors with industrial ethernet and customized improvements. They work together with their customers and representatives to find an economic, yet technically advanced solution to complicated control applications.
 
 
 
JVL's wide selection of quality products for motion control components include: Integrated VAC and VDC Servo motors, Integrated Stepper motors, VAC Servo motor controllers, Motor drivers (Stepper, VAC and VDC), Brakes, Gears, and HMI Modules.
 
italia

Fluidic & Electric Rotary Joints for Semiconductor machines

Montag, 18 Mai 2015

Fluidic & Electric Rotary Joints for Semiconductor machines

It is very common that electrical components and semiconductors manufacturing process needs to be done in a cleanroom, that means an uncontaminated environment with high precision, high efficiency and high reliability machines. Up to the present day, DSTI has long been supplying Fluidic Rotary Joints suitable for sterile environments.

Signals and power can also be transferred as well as fluids.

  1. Rotary Joint designed for extremely low temperature (-145°) and vacuum; for this reason, non-degassable materials are avoided and special seals are used to prevent any transmission gas leak.
  2. Rotary Joint for small robotic arms working in sterile environments. Fully manufactured in aluminium to reduce the weight, this joint suits all of high data rate signal transmission needs.
  3. This Fluidic Rotary Joint, has been designed for semiconductor plating processes. Its role is to distribute water and air on board. It has special seals which are able to avoid fluids transmission leakage and therefore their contamination.
italia, francia, germania, spagna, repubblica ceca, irlanda, belgio, austria, svizzera, israele, portogallo, slovenia, bulgaria

Fluidic Rotary Joints for Machine Tools

Montag, 27 April 2015

Fluidic Rotary Joints for Machine Tools

DSTI display of a wide range of single/multi passage Rotary Joints, with leak protection. All its products are suitable for different kind of fluids. Thanks to the high experience, DSTi is able to supply Fluidic Rotary Joints which has already been used on many applications.

Milling Machine

It has an efficient leak protection system that keeps the contamination out. Moreover it has a bevelled through-hole to host Slip Ring connectors.

Features:

  • #3 passages
  • 10 rpm
  • 2000 psi
  • Media: oil, gas, water
  • Housing: Steel

Integrated Rotary Table

This Hydraulic Rotary Joint has been designed to be itself the support of the inboard bearings. It is utilised to supply the hydraulic locking system of the piece being machined.

Features:

  • #3 passages
  • 20 rpm
  • 5000 psi
  • media: oil
  • Housing: carbon & steel

Rotary table on large Milling Machines

In this case, the Rotary Joints has been designed to transfer different kind of media on board of the rotary table.

Feautures:

  • #3 passages
  • 50 rpm
  • 145 psi
  • Media: oil, gas, water
  • Housing: Steel

When necessary, Servotecnica offers Fluidic & Electric Combined Rotary Joints to transfer signals and electric power as well as fluids.

italia, francia, germania, spagna, repubblica ceca, irlanda, belgio, austria, svizzera, israele, portogallo, slovenia, bulgaria

Motori stepper con elettronica integrata - Lexium MDrive

Montag, 27 April 2015

Motori stepper con elettronica integrata - Lexium MDrive

Nuova serie di prodotti Lexium MDrive di Schneider Electric, motori passo passo con elettronica integrata di nuova generazione. Disponibili con diversi bus di campo (CanOpenRS-422/485Ethernet IP o TCP/IPModbus TCP e Profinet) o con funzionamento step/direzione, permettono le più svariate applicazioni ottimizzando cablaggio e costo finale dell’applicazione.
Gli ingressi digitali programmabili, l’ADC a 12 bit integrato  e l’interfacciamento semplice ed intuitivo con i principali controlli disponibili sul mercato, lo rendono adatto ad applicazioni a singolo o multiasse nei principali campi applicativi quali packaging, medicale, printing e sorting.

Opzioni disponibili:
• versione ad anello aperto (senza encoder) per un’ottimizzazione dell’aspetto economico
• versione  ad anello chiuso (con encoder magnetico 4000 cpr) in grado, tramite la tecnologia hMT, di massimizzare le performance del motore, diminuirne il riscaldamento e, allo stesso tempo, risparmiare energia, unendo i benefici dei motori servo alla semplicità di utilizzo tipica dei motori stepper.

italia

Pegasus, il servomotore brushless con elettronica integrata

Montag, 27 April 2015

Pegasus, il servomotore brushless con elettronica integrata

La disponibilità di bus di campo sempre più veloci (EtherCAT) ha comportato, nel mercato dell’automazione in genere e nel motion control in particolare, il passaggio a sistemi ad architettura distribuita. Pegasus, un servomotore con elettronica integrata, è la risposta giusta a questa tendenza.
La necessità di ridurre sempre più le dimensioni degli armadi elettrici, spinge i progettisti delle macchine automatiche a spostare gli azionamenti sempre più vicino ai motori a bordo macchina, se non addirittura a bordo dei motori stessi riducendo costi e aumentando l’affidabilità.

Pegasus integra in un solo package servomotore, encoder magnetico, azionamento e comunicazione EtherCAT: reale soluzione alle prestazioni richieste, ad un prezzo vantaggioso.

italia

Exlar® linear actuation controls motor waste gate

Samstag, 21 März 2015

Exlar® linear actuation controls motor waste gate

CUSTOMER

A large diesel engine manufacturer based in Europe.

APPLICATION

Linear actuation of the motor waste gate.

CUSTOMER CHALLENGE

The customer previously used hydraulic and pneumatic cylinders to control the motor waste gate. To meet increasing fuel economy standards required greater control over the waste gate than was available from either the hydraulic or the pneumatic solution. The primary challenge was finding a solution that offered the fast response of a hydraulic solution but with more control flexibility.

SOLUTION

The customer selected the Exlar® GSM integrated motor / actuator because of its compact and lighter weight design and form factor that is similar to a hydraulic cylinder. This project will order over 100 pcs. per year.

RESULTS

The Exlar actuator offers better control response than the old hydraulic system that it replaced and all the control flexibility desired by the customer. The superior performance of the Exlar GSM actuator was a key contributor to meeting the new fuel economy standard.

italia

Torque QTR Motor Series

Donnerstag, 19 März 2015

Torque QTR Motor Series
italia

Sleek Design of Exlar® GSM is Perfect Solution

Mittwoch, 18 März 2015

Sleek Design of Exlar® GSM is Perfect Solution

Sleek Design of the Exlar® GSM Integrated Electric Motor / Actuator is the Perfect Solution for Next Generation Personal Fitness Equipment

CUSTOMER

Industry-leading manufacturer of innovative high performance personal training equipment

APPLICATION

Customer was designing a suite of high-end physical training equipment that would offer the ability to craft specific workouts and track individual progress. This move was initiated to allow the user to track their workout and give a more comprehensive workout then what was available on the market.

CUSTOMER CHALLENGE

To improve on competing exercise equipment designs required developing an entirely new product. The customer’s design concept was to offer a programmable workout load based on individual user requirements.  The ability to increase or decrease the force in either the extension or retraction direction would give the user a more comprehensive workout that is not achievable with traditional free weights or mechanical workout type equipment. This design concept ensures a better workout and offers unique training and performance tracking capabilities. Finding an actuation solution that provided the required programmability and control flexibility proved a significant challenge.

SOLUTION

The controllability and force density of the Exlar® GSM integrated motor / actuator proved a perfect fit for this application. The GSM actuators are the primary resistance mechanism on each of their five muscle group specific platforms. After considering two other competitive solutions, the product of choice was the Exlar GSM30-1001-XCM-AM1-218 electric actuator. Exlar was chosen because of the “all in one package” that was compact, esthetically appealing, and within the force range necessary to meet all equipment design requirements for each of the muscle group platforms.

RESULTS

The Exlar GSM solution met or exceeded all specifications for speed, force and control flexibility. In addition, the long life offered by the GSM’s roller screw technology has allowed the customer to pursue high-use opportunities at major health clubs across the country.

italia

Exlar® Tritex II Add on Instructions

Mittwoch, 25 Februar 2015

Exlar® Tritex II Add on Instructions

January 26, 2015 – Curtiss-Wright Corporation (NYSE: CW) today announced the release of the Exlar® Add-On Instruction set (AOI) and the updated Expert Software to support it. Add-On Instructions encapsulate commonly used functions and simplify the setup of external devices within the Rockwell Automation Integrated Architecture control platform, reducing errors and development time when configuring a device over the EtherNet/IP network. The Tritex II from Exlar is a fully integrated drive / motor / actuator capable of communicating over EtherNet/IP when an EIP option card is installed. As an Americas partner product in the Rockwell Automation Encompass™ Program, the Tritex II with EIP option card integrates seamlessly into the Rockwell Automation Integrated Architecture™. The AOI works with both Tritex II AC and DC powered, rotary, or linear models that include the EIP option card and supports the following functions: User units Control drive Drive status Jog Operation Move operation Host mode The new software, Exlar AOI, and user manual can be downloaded at: http://exlar.com/why-exlar/rockwell-automation-encompass-program-support/ About Exlar Actuation Solutions Exlar is a business group of Curtiss-Wright Sensors & Controls Division. Exlar designs, manufactures, and sells linear and rotary motion products worldwide. For general product information contact Exlar Corporation, 18400 West 77th Street, Chanhassen, MN 55317, phone 952-500-6200 or visit our website at www.exlar.com. About Curtiss-Wright Corporation Curtiss-Wright Corporation (NYSE:CW) is a global innovative company that delivers highly engineered, critical function products and services to the commercial, industrial, defense and energy markets. Building on the heritage of Glenn Curtiss and the Wright brothers, Curtiss-Wright has a long tradition of providing reliable solutions through trusted customer relationships. The company employs approximately 10,000 people worldwide. For more information, visit www.curtisswright.com. About the Rockwell Automation PartnerNetwork™ Program The Rockwell Automation PartnerNetwork program offers global manufacturers access to a collaborative network of companies mutually focused on developing, implementing and supporting best-in-breed solutions to achieve plant-wide optimization, improve machine performance, and meet sustainability objectives. About Rockwell Automation Rockwell Automation, Inc. (NYSE: ROK), the world’s largest company dedicated to industrial automation and information, makes its customers more productive and the world more sustainable. Headquartered in Milwaukee, Wis., Rockwell Automation employs about 22,000 people serving customers in more than 80 countries. Encompass and PartnerNetwork are trademarks of Rockwell Automation Inc.

italia

The New DMC-500x0 EtherCAT Controller

Freitag, 06 Februar 2015

The New DMC-500x0 EtherCAT Controller

Fast and Flexible­ Galil Motion Control is pleased to introduce the newest entry in its latest generation of digital motion controllers, the DMC-500x0 EtherCAT Controller. Incorporating all of the features of our flagship Accelera series controller and designed with compatibility and flexibility in mind, the DMC-500x0 allows integration of remote EtherCAT drives into new and existing applications with just a handful of configuration commands. The DMC-500x0 is offered in 1 through 8 axis formats. Axes 1 - 4 can be configured as either local or EtherCAT drives while axes 5 – 8 can be configured for additional EtherCAT drives. Unique to the motion control industry, this ability to mix and match local and EtherCAT drives on the same controller provides increased flexibility for any application. In addition, the DMC-500x0 is fully compatible with Galil’s internal servo and stepper motor amplifiers as well as third party external drives. Once enabled, an EtherCAT axis replaces a local axis and can be controlled in the same manner. This transparency means access to Galil’s full library of coordinated motion functions that can be mapped to any combination of local and EtherCAT axes. Standard modes of motion include Jogging, Point to Point, Electronic Gearing and Cam, Linear and Vector Interpolation, Contour, and PVT modes. EtherCAT drives can be configured in software to close the PID control loop on the controller or on the drive. In the first mode, torque commands are sent to the motor amplifier after closing the control loop using Galil’s on board PID control algorithm. This mode allows access to the Galil’s standard PID control loop features, including advanced PID compensation, velocity feedforward, acceleration feedforward, integrator limits, notch filter, low pass filter and backlash compensation. In the second mode, the servo control loop is closed on the EtherCAT drive with the Galil controller sending motion profile commands at rates of up to 2.5 kHz on a 1-4 axis controller. Standard opto-isolated inputs for each local axis include a forward limit, reverse limit and homing input. The controller also features 8 uncommitted opto-isolated inputs and 8 uncommitted opto-isolated high power outputs. The DMC-500x0 includes 8 uncommitted analog inputs, allowing the controller to interface with analog sensors such as joysticks and temperature sensors. Inputs from two separate encoders are available for each local servo axis. Local auxiliary encoder inputs are also available for axes configured for EtherCAT, providing access to Galil’s dual feedback PID control loop. The DMC-500x0 can be used with Galil’s newest software package, GalilSuite; simplifying system set up, controller programming and servo tuning. Also included is access to the GalilTools API, allowing development of powerful host applications in multiple languages and operating systems. Like all Galil controllers, the DMC-500x0 uses Galil’s easy to learn two letter ASCII command language. Configuring and programming the controller is simple and intuitive with English-like commands such as TP for Tell Position and EU for EtherCAT network Up. Built in subroutines and error monitoring make development of robust applications a straightforward affair. The DMC-500x0 comes with one CAT5e Ethernet port for communication with a host PC and one CAT5e EtherCAT port to communicate with EtherCAT drive(s). Multiple EtherCAT drives can be linked together in a daisy chain configuration and connected to the controller’s CAT5e EtherCAT port, simplifying wiring and decreasing setup time. Two RS-232 ports are also provided for communication with a host PC and peripherals. The DMC-500x0 is packaged in a compact metal enclosure measuring 8.1” x 7.25” x 1.72” and operates from a single 20 – 80 volt DC supply. Currently, the following EtherCAT drives are supported: Yaskawa Sigma-5 SGDV-R90FE1A AMC DZEANTU-020B080 Copley XenusPLUS XEL-230-36 Panasonic Minas A5B Sanyo-Denki SANMOTION R RS2A01A2HA5 Support for additional drives will be added in the future. Speak with a Galil Applications Engineer for drive specific support. The DMC-500x0 EtherCAT controller is available now. Please call Galil at (800) 377-6329 or go to http://www.galil.com/motion-controllers/multi-axis/dmc-500x0 for more information.

italia

Ethernet and CANopen communication protocols for Lexium MDrive® integrated motor products

Freitag, 06 Februar 2015

Ethernet and CANopen communication protocols for Lexium MDrive® integrated motor products

MARLBOROUGH, CT – August 6, 2013 – Lexium MDrive integrated motor products are now available with two proven, widely used industrial fieldbus technologies: Ethernet protocol including EtherNet/IP and ModbusTCP; and CANopen protocol. Lexium MDrive fieldbus products deliver the same benefits – including compact design, reduced wiring, improved machine reliability – to robust networking systems for industrial automation.

italia

Circular M12 connectorized Lexium MDrive® products

Freitag, 06 Februar 2015

Circular M12 connectorized Lexium MDrive® products

MARLBOROUGH, CT – August 20, 2014 – Circular M12 connectors are now available on Lexium MDrive® integrated motor-drive-controller-encoder systems for industrial automation applications. Industry standard M12 circular connectors facilitate fast implementation of Lexium MDrive products in new and existing systems and equipment.

italia

JVL - 12-48VDC 400W Integrated Servo Motor is  Available

Freitag, 06 Februar 2015

JVL - 12-48VDC 400W Integrated Servo Motor is  Available

Birkerød, Denmark -- Designed for battery powered and low voltage applications the MAC402 is now available from JVL, a leader in the field of integrated servo and stepper motors. The MAC402 is the VDC version of the popular MAC400 400W integrated servo motor. The supply range for the MAC402 is from 12VDC up to 48VDC, and full power of 400W (RMS) up to 1200W (peak) can be reached with 24 to 48VDC. This powerful, compact motor measures just 191mm (7.52 in.) x 60mm (2.36 in) x 114mm (4.49 in.) Applications include but are not limited to: Remotely operated robots, robotic vehicles, portable equipment, tracking devices, antenna mounts, and positioning devices. Only JVL presently offers a 400W continuous (1200W peak) integrated servo motor in the supply range of 24 - 48VDC operating at 0 to 3000 RPM. In many applications it is not necessary to choose a 750W or larger motor as the 400W (1200W peak) motor will be sufficient, thereby reducing cost and saving space. MAC402 options include: Brake, absolute multi turn encoder, and planetary & cycloidal gearheads. A wide selection of communication modules is available for MAC402 motors including: Basic modules for Pulse-Direction (or analog input) or fieldbus modules including Profibus, Devicenet and CANopen, or programmable modules with easy connections to local sensors make integration into new and existing applications easy. Moreover, a wide variety of industrial Ethernet options are available: EtherCAT, EtherNet/IP, Profinet, Powerlink, Modbus TCP and Sercos III. With the VDC supply option the advantages of the MAC400 VAC servos have been expanded to include applications for battery and low voltage operation, from 12 to 48 VDC. With wireless options like WLAN/Wifi, Zigbee or Bluetooth, the MAC402 MAC motor® can run completely wireless. A big advantage of using an integrated MAC motor®is that there is no need for a separate servo driver/controller. The advantages are: Space savings in the control cabinet, eliminating expensive motor and encoder cables, RFI/EFI noise is minimized due to internal cabling, and connection errors between driver and motor are eliminated. Additionally, service is much easier as the motor and controller are replaced as a single integrated unit minimizing downtime and maximizing production. About JVL - JVL is recognized as a leader for its development of efficient and compact integrated motors for VAC and VDC. MAC motor series of integrated VAC servo motors (up to 4500W and 13,5kW peak), and the QuickStep integrated stepper motors (up to 25Nm). Both the servo motor and stepper motor series includes the controller, PLC, encoder, AC power supply and bussystem integrated into one compact unit. All industrial ethernet busses like Profinet, EtherCat, Ethernet IP, Modbus TCP, Powerlink etc. are available. JVL with more than 20 years of motion control experience enjoys a reputation for the development of higly specialized integrated motors with industrial ethernet and customized improvements. They work together with their customers and representatives to find an economic, yet technically advanced solution to complicated control applications. JVL's wide selection of quality products for motion control components include: Integrated VAC and VDC Servo motors, Integrated Stepper motors, VAC Servo motor controllers, Motor drivers (Stepper, VAC and VDC), Brakes, Gears, and HMI Modules.

 

Read more here

italia

AMK draws the safety card

Freitag, 06 Februar 2015

AMK draws the safety card

(pressebox) (Kirchheim/Teck, 09.01.2014) With its new KW-R07 and KW-R17 controller cards, AMK is adding Functional Safety to its line. The TÜV-certified modules enable safe machine concepts up to PLe (ISO 13849-1.2008) and SIL 3 (IEC 62061). This new drive-based safety technology is tailor-made for integration into AMK AMKASYN KE/KW servo converters.The controller cards provide Safe Encoder Monitoring (SEM) and Safe Maximum Speed (SMS) functions for normal operation. In terms of operating modes, AMK offers the following functions: Safe Operating Stop (SOS), Safe Speed Range (SSR), Safely Limited Speed (SLS), Safe Direction (SDI), and Safely Limited Increment (SLI). The following stop functions are also available: STO, SS1 und SS2. These functions are controlled via local safety inputs or via the FSoE safety protocol within an EtherCAT communication. The controller card provides three safe inputs and two safe outputs for connection. Commissioning is carried out with the AIPEX PRO engineering software in which AMK has integrated the certified PMT safe parameter editor. By expanding Functional Safety, AMK is underscoring the trend in the machine and plant construction sector to reduce downtimes by safely monitoring motions. Instead of time-consuming shutdowns for re-equipping or maintenance, production equipment with current safety functions can be restarted and become productive again much more quickly.

italia

AMK reduces wiring in half

Freitag, 06 Februar 2015

AMK reduces wiring in half

(pressebox) (Kirchheim/Teck, 09.01.2014) Two become one: in the future AMK will also offer its DYNASYN synchronous servo motors in a single-cable version. With this version, the servo specialists from Kircheim/Teck, Germany, are cutting the cabling and installation effort for machine construction practically in half. The new wiring technology is tailor-made for motor feedback systems with Hiperface DSL. This new development combines the voltage supply and the digital encoder signal on one cable. As a result, the encoder cable required up to now, along with its installation, can be eliminated completely. Other advantages of the single-cable wiring technology result from reductions in mass. Having fewer cables expands the options for space-saving machine designs because slimmer cable ducts are possible. The weight reduction also affects mobile cable handlers, in particular, in the form of reduced intrinsic mass, which ultimately leads to lower motor ratings and higher energy efficiency - especially during constant reversing of positioning applications. The new fully-digital Hiperface DSL motor feedback interface is available in the AMKASYN KE/KW central inverter system in conjunction with the KW-R26 controller card. AMK also views this as advanced technology, because it saves space, connectors, and installation effort and also affords more possibilities for machine construction. Besides the digitally modulated feedback signals, the data of other sensors, such as sensors for monitoring winding temperatures, can be transmitted via the feedback protocol. Another advantage: from the vantage point of Functional Safety, Hiperface DSL is certified for applications up to SIL 3 or Performance Level e.

italia

Higher performance with lower consumption

Dienstag, 27 Januar 2015

Higher performance with lower consumption

Electronic fuel injection in UAVsSmall and miniature aircraft, also known as UAVs (unmanned aerial vehicles), require reliable propulsion systems in order to achieve extended flight times with minimal quantities of fuel. Previously, the only option available for fuel delivery to the engine was a carbu­retor. The latter, however, is not able to provide an optimum fuel mix for all of the various phases of flight. A newly developed miniaturized electronic fuel injection (EFI) system designed specially for small combustion engines now provides the benefits of fuel injection, long enjoyed in larger engines, for small UAVs. The most striking characteristics of this system are higher performance combined with reduced consumption and considerably increased reliability. Microdrives are used to power the fuel pump to ensure the correct pressure in the fuel system. The properties required include high performance density together with low weight and superior reliability. Electronic fuel injection in UAVsSmall and miniature aircraft, also known as UAVs (unmanned aerial vehicles), require reliable propulsion systems in order to achieve extended flight times with minimal quantities of fuel. Previously, the only option available for fuel delivery to the engine was a carbu­retor. The latter, however, is not able to provide an optimum fuel mix for all of the various phases of flight. A newly developed miniaturized electronic fuel injection (EFI) system designed specially for small combustion engines now provides the benefits of fuel injection, long enjoyed in larger engines, for small UAVs. The most striking characteristics of this system are higher performance combined with reduced consumption and considerably increased reliability. Microdrives are used to power the fuel pump to ensure the correct pressure in the fuel system. The properties required include high performance density together with low weight and superior reliability.

italia

6.5 billion kilometers to the workplace

Dienstag, 27 Januar 2015

6.5 billion kilometers to the workplace

At the end of May 2014, the Rosetta space probe will swing into an orbit around the comet 67P/Churyumov‐Gerasimenko in order to, after more closely approaching it in August, map its surface and thus prepare for the landing of Philae. On 12th November, this ballistic lander, weighing 100 kg, touched down on the comet and began experiments intended to provide information about its composition. This lander has 14 FAULHABER drive systems which defied the harsh conditions of the 10 year long journey through the vacuum and incredibly low temperatures of space, in order to deliver valuable information on the creation and history of our solar system. 14 FAULHABER Drive System work on board of Philae

italia

An almost incredible degree of accuracy

Dienstag, 27 Januar 2015

An almost incredible degree of accuracy

Exact positioning for astronomy and molecular research.Why is it much warmer one million kilometres away from the sun than on its surface? Even today, we still do not have a definitive answer to this seemingly simple astronomy question. Two satellites, set to go into orbit in 2017 in a formation accurate down to the last millimetre, may be able to help solve the mystery. One satellite will cover the sun, so that the other will be able to observe the hot solar corona undisturbed. In order to install the measuring instruments for this incredible feat of precision, the technicians at the European Space Agency (ESA) are using a hexapod. Manu­factured by SYMETRIE, a high-tech company based in the South of France, the hexapod is powered by motors produced by FAULHABER. During a solar eclipse, it is possible to see the solar corona or aureole surrounding the darkened surface of the sun with the naked eye. Comprised almost entirely of ionised plasma, it extends into space to a distance of up to three solar radii. With a temperature of several million Kelvin, it is so hot that the 5778 Kelvin on the sun's surface almost seem cool in comparison. Up until now, the reason for this enormous difference could not be investigated in detail. On Earth, large parts of its radiation are swallowed up by the atmosphere, while in space, observation is subject to technological limitations: the surface of the sun must be covered so that it does not outshine the corona, however, with the equipment currently available, this means that the part of the solar corona that is close to the sun is also hidden. A hair's breadthFor this reason, the ESA plans, as part of its StarTiger programme, to launch two satellites in 2017 that are set to travel in a unique formation. They will orbit the Earth at a distance of just 150 metres to each other – and at a speed of several kilometres per second, that is truly the proverbial hair's breadth. The shield of one of the satellites is set to cover the sun in such a way that the instruments on the other will be able to capture the radiation of the corona to a degree not previously possible.To facilitate optimum alignment of both satellites as well as the instrumentation on board, the ESA technicians have simulated the conditions of space travel at the Laboratory of Astrophysics in Marseilles, France. A coronagraph, which is set to capture the radiation of the solar corona on the satellite that is in the shade, has been mounted on a BREVA hexapod (a "six-legged" robot) manufactured by SYMETRIE. In each leg, a brushless DC-Micromotor is installed with an integrated encoder. By extending and retracting the legs, the platform mounted on top can be adjusted freely in any direction. Thanks to the outstanding dynamics and power density of FAULHABER drives even in the smallest spaces, as well as the high encoder resolution, even large masses can be positioned quickly, reliably and precisely.A mirror for the next HubbleThanks to this freedom of movement, the ESA technicians have been able to simulate a variety of positions for the "flying machines" in relation to one another. The hexapod is distinguished by a number of features that make it ideal for the task at hand, as SYMETRIE managing director Olivier Lapierre explains: "It performs - under the most limited tolerances - the minimum movements required with exact precision, yet is also extremely rigid and can thus accurately maintain the specified position." A further strength of the product is its sophisticated software that ensures smooth component interaction and allows, for example, any virtual centre of rotation to be specified for the platform, and particularly gentle sequences of movement to be achieved. These features of the SYMETRIE precision hexapods are also in use in other space programmes such as the James Webb Space Telescope, which is set to replace the famous Hubble telescope in 2018, as well as in the GAIA project aimed at mapping the Milky Way. In each of these projects, hexapods are being used to mount optical units. Mr. Lapierre describes a typical task as follows: "The hexapod helps to adjust a mirror in the specified position with submicrometer precision." As is the case with StarTiger, an almost incredible degree of accuracy is required: the Webb telescope should theoretically be able to detect a single candle on one of the moons of Jupiter. The most powerful X-ray beamHowever, the BORA hexapod used for the GAIA project was not originally developed for astronomy, but for the observation of extremely small objects. It originated as part of a collaboration with the European Synchrotron Radiation Facility (ESRF) in Grenoble, France. The synchrotron in the French Alps accelerates electrons almost up to the speed of light, causes them to collide, and generates the world’s most powerful X-ray beam. It is around ten thousand times more powerful than the output of a medical X-ray device, yet as fine as a human hair. This beam is used to analyse a whole range of samples and materials, from semi-conductor crystal structures through to molecular movements in living cells. "Our hexapods are used at the ESRF to move calibration mirrors and samples into specific positions and to accurately maintain those positions thanks to their excellent stability", explains Olivier Lapierre. Regardless of whether we are looking into the infinity of space or at detailed structures at molecular level, the essential requirements that a positioning hexapod must meet remain the same: maximum manoeuvrability and precision together with absolute stability. Additional specifications may be added, depending on the application. Both for ESA and at the ESRF, a considerable amount of work is performed in a vacuum or cleanroom environment where the equipment must obviously also meet corresponding requirements. Space is also often at a premium, with the result that mini-hexapods are required. The ideal solution for positioning in the smallest of spaces is the BREVA model's little brother, BORA. With a footprint diameter of 212 millimetres, it is also just 145 millimetres tall. Despite these almost minuscule dimensions, it can move a load of up to 10 kilogrammes at a resolution of 0.1 micrometres on its directional axes and of 2 microrads on the rotational axes. "The FAULHABER motors play an essential role in our hexapods", explains Olivier Lapierre. "They offer the best combination of compact sizing and product quality on the market." More information you can find under www.symetrie.fr

italia

A new compact drive with integrated CAN bus control

Dienstag, 27 Januar 2015

A new compact drive with integrated CAN bus control

From track to track more efficiency in agricultural technology In order to optimize the dosage of the fertiliser or the seeds, KAG has developed a new drive with integrated CAN bus control. Meanwhile, the combination of motor and gearbox with integrated electronics has successfully passed all testing phases. Currently, the pilot series is in the field test. Thus, a KAG DC motor with a universal multi-master field bus system is available for the first time, where the software can be adapted individually for each manufacturer with little effort – and this motor thrills with many other advantages. Today, newest technologies allow an ever faster and more and more efficient work in the agricultural sector. KAG supports this progress with drives that are already established in the international agricultural technology and works with full stretch on innovative developments in order to accelerate work processes and to reduce the energy demand at the same time. Custom-made solution “Our current project is about a gear motor with integrated CAN bus control, which is responsible for the efficient dosing of the seeds in a singe-grain sowing machine”, explains Andreas Schwerdtfeger, graduate engineer and developer at Kählig Antriebstechnik GmbH. “The objective is that the work tool puts the grain of seed on the field to the exact position within a very short time.” This automation process is carried out by evaluation of sensors and by special (motor) software, which communicates with the superordinated “job computers”. “What is special about our new gear motor with i42DC is that the integrated CAN bus control is based on the international standardised protocol EN 50325-4, and that we can integrate customer requests into the software. In this way, besides the custom-made motor (+gear) solution with, for instance, a high IP protection and/or stainless steel shaft, further possibilities for the adaptation to customer requirements are available.” This universal electronics, serving as an interface, can be adapted by means of Software modifications to the customizable control of each manufacturer. Thus, the seed placement on the field becomes significantly more precise, fast and efficient. Simple assembly tanks to Plug and Play “Another big advantage of the electrification in agricultural machinery for this project is, besides the precise approach to each individual seed row, the modular fixation by ‘Plug and Play'”. “The drive can be assembled to the customer’s application directly out of the shipping box: push in the plug and get started! Previous hydraulic motors could contaminate the ground with oil in the event of a fault. In case that an electrical motor should ever fail, a simple exchange is a matter of minutes. Our drives have a very high quality and thus are extremely reliable. We set ourselves apart by the precise manufacturing of individual components, and so we realise a high accuracy of fit of the components, which supports the function of sealing elements and so protects the motor against the penetration of water”, tells Schwerdtfeger. The corrosion resistance, which is already very high (for example, motor housings are not chromed but realised in cathodic dip painting (CDP)) can still be increased by varnishing upon customer request. Features of the Controller Area Network electronics at a glance: CAN and CANopen interface 5 I/O channels Integrated absolute value transmitter Up to 3 configurable analogue inputs Up to 4 configurable digital outputs Up to 3 configurable digital inputs Speed and position control Incremental encoder output with selectable resolution Quadcount pulse input for high-frequency signal Customer-specific firmware Control via bus, analogue or by PWM IP67 option for motor assembly Reverse polarity protection 4-Q operation For further information feel free to contact us: Kählig Antriebstechnik GmbH Pappelweg 4 30179 Hannover phone: +49 511 6 74 93-0 fax: +49 511 6 74 93-67 info@kag-hannover.de PDF-Download: KAG Webnews 0001 Agriculture

italia

FT Series Product Line Expands with New FT45

Montag, 26 Januar 2015

FT Series Product Line Expands with New FT45

Gilbert, AZ. – January 5, 2015 – Curtiss-Wright Corporation (NYSE: CW) today announced the expansion of its Exlar FT Series™ universal electric rod style linear actuator product line with the release of the FT45 model. The FT Series roller screw driven actuators offer high thrust, high speed, and high robustness in a compact form factor, making them an ideal alternative to hydraulic cylinders.  With continuous force rating to 40,000 lbf (178 kN), speed to 60 in/sec (1,500mm/sec) and stroke lengths from 6 inches (150mm) to 8 feet (2,400mm) the FT Series can be applied across a wide range of linear motion applications. The new FT45 has a continuous force rating of 10,000 lbf (44.5 kN), filling the gap between the existing FT35 and FT60 models.  The FT45 features the following key enhancements over the existing FT Series frame size designs, including the largest FT80 model: IP65 (min.) environmental protection standard on all mounting configurations Idler pulley design greatly simplifies motor installation and belt tensioning / maintenance Grease zerk fitting allows re-greasing of nut assembly without having to disassemble the unit Removable front seal bushing design greatly simplifies front seal maintenance / replacement About Exlar Actuation Solutions Exlar is a business group of Curtiss-Wright Sensors & Controls Division.  Exlar designs, manufactures, and sells linear and rotary motion products worldwide.  For general product information contact Exlar Corporation, 18400 West 77th Street, Chanhassen, MN 55317, phone 952-500-6200 or visit our website at www.exlar.com. About Curtiss-Wright Corporation Curtiss-Wright Corporation (NYSE:CW) is a global innovative company that delivers highly engineered, critical function products and services to the commercial, industrial, defense and energy markets.  Building on the heritage of Glenn Curtiss and the Wright brothers, Curtiss-Wright has a long tradition of providing reliable solutions through trusted customer relationships. The company employs approximately 10,000 people worldwide.  For more information, visit www.curtisswright.com.

italia

Linear motor solutions into vacuum

Montag, 26 Januar 2015

Linear motor solutions into vacuum

Linear motor solutions into vacuum A growing amount of high tech applications require vacuum solutions to minimize the risk of unwanted chemical reactions or pollution of the process or surrounding equipment. Motion is one of the main challenges within a vacuum environment. Serviceability, reliability, versatility and outgassing are critical factors in vacuum applications. Linear vacuum rated motors have no moving parts and are frictionless making the motors maintenance free. Additionally Tecnotion’s linear motors can be placed into vacuum as a whole and therefore do not require a feed trough saving costs. Tecnotion´s vacuum rated ironless linear motor is a dedicated and specifically designed coil unit and magnet yoke for use in high vacuum, down to 10-8 mBar , and the lowest achievable outgassing for a series product. Tecnotion currently offers three types of vacuum linear motors 1. Vacuum rated Ironless linear motors for very high and low vacuum requirements. Click here to download the official pressrelease All Tecnotion vacuum rated products are designed, produced, quality inspected and packed in our cleanroom facilities in the Netherlands. 2. Linear Motor Transport system using iron core or ironless motors. 3. Customized linear actuator designed to customer requirements and, if required, the highest specifications available on the market. For more information about Tecnotion's vacuum motors please mail to sales@tecnotion.com.

italia

The All-Purpose linear motor : TL series

Montag, 26 Januar 2015

The All-Purpose linear motor : TL series

The All-Purpose linear motor : TL series The mid-range linear motor of Tecnotion, the TL series are characterized by their excellent ratio between size and performance, which makes the TL very useful in a variety of applications for different industries. Next to the good values regarding the power density of the motors, a general advantage of the TL is the large number of available types. With coil lengths from 146mm up to 468mm, continuous force is covered from 200N to 800N and peak forces from 400N to 1600N. In addition, depending on the requirements, a maximum speed up to 7 m/s can be achieved by choosing the right type of the two coil windings available. Depending on the positioning system used, the TL can be driven in the Submicron Range and has an extremely low attraction force between the coils and the magnets. By default, all engines of the TL- series are equipped with channels for optional water cooling, which makes the TL particularly interesting for thermally demanding applications. Iron Core TL- series In addition, depending on the application, the values of the continuous force increase around 5%. This makes the TL suited for nearly any application, e.g. for the long travel lengths of large digital printers or in AOI applications. But also in water jet cutting and laser cutting systems, the TL has been successfully applied. For more information and specifications about the TL series please mail to sales@tecnotion.com. Click here to download the official pressrelease

italia

Product Launch:New Fieldbus interface unit

Montag, 26 Januar 2015

Product Launch:New Fieldbus interface unit

On June 2, 2014, Magnescale (President Toru Fujimori) officially launched the “MG50”, a new Fieldbus interface unit compatible with our Tough Sensor lineup, for open network applications. Our current “Tough Sensor” series digital gauges (released March, 2013) provide high rigidity and high precision, and feature digital tolerance functions with intuitive and simple setup in an extremely slim shape. Since the launch of the “Tough Sensor”, many of our customers have requested the function of transferring measurement data to a PLC and aggregated data to be calculated freely. The “MG50” fieldbus interface unit aggregates measurement data to a PLC, via EtherCAT or CC-Link, with a maximum of 30 connectable gauges (EtherCAT) per transfer unit. By using a function block for each PLC (available soon), basic calculations can be performed such as maximum, minimum, thickness and so on. Furthermore, we launched our new “MT20” interpolator which is used when connecting our “DT” series (general purpose model) gauges to our “MF10” counter module, thus increasing the range of our Tough Sensor lineup.

DF800S series

High durability, high resolution
digital gauge DF800S series

DT Series

General Purpose digital gauge
“DT” Series

MG50 Series

 

Data transfer unit “MG50” Series

System structure

System structure

Network Interface Unit (MG50 Series : New)

MG50-EC Main module for EtherCAT. Maximum connectable length
measurement unit: 30
MG50-CL Main module for CC-Link. Maximum connectable length
measurement unit: 16
MG51 Distribution module. Maximum cable length: 30m
MF10-CM Counter module for digital gauge “DF800S” and counter
module “MG50/51”
CE34 Connection cable between DF800S and MF10. Maximum cable
length: 20m
MT20-01 Interpolator when connecting DT512 series(resolution: 1µm) to
MF10 series
MT20-05 Interpolator when connecting DT12/32 series(resolution: 5µm) to
MF10 series

 

High durability, High resolution model(DF 800S series: Existing products)

Feature Extremely slim digital gauge provides high durability and high resolution of 0.1µm and its ball spline construction achieved 92 million strokes.
DF805SR/DF805SFR Measuring range : 5mm, Straight type/Straight flange type
DF805SLR/DF805SFLR Measuring range : 5mm, Right-angle type/Right-angle flange type, Protection grade: IP67
DF812SR/DF812SFR Measuring range  : 12mm, Straight type/Straight flange type
DF812SLR/DF812SFLR Measuring range : 12mm, Right-angle type/Right-angle flange type, Protection grade: IP67

 

General purpose model (DT series : Existing product)

Feature General purpose digital gauge for wide variety of sorting usage
which do not require high resolution
DT512N/DT512P Measuring range : 12mm, Accuracy : 6μm, Resolution: 1μm
Standard type/Drip-proof type
DT12N/DT12P Measuring range : 12mm, Accuracy : 10μm, Resolution: 5μm
Standard type/Drip-proof type
DT32N/DT32P Measuring range : 32mm, Accuracy : 10μm, Resolution: 5μm
Standard type/Drip-proof type 32mm
DT32NV/DT32PV Measuring range : 32mm, Accuracy : 10μm, Resolution: 5μm
Standard type/Drip-proof type 32mm, Pneumatic push

 

Digital tolerance indicator(MF10-P series : Existing product)

MF10-P1 Number of Go/NoGo judgment outputs : 2, Number of output
signal : 2, NPN output type
MF10-P2 Number of Go/NoGo judgment outputs : 2, Number of output
signal : 2, PNP output type

italia

DC‐Micromotors series 3890...CR

Dienstag, 23 Dezember 2014

DC‐Micromotors series 3890...CR

The development of the new 3890…CR series is based on the successful motor concept of the CR DC-Micromotors series with Graphite Commutation from FAULHABER. A very powerful neodymium magnet and particularly high copper content in the winding of its FAULHABER rotor provide the compact drive with an enormous amount of power. For drives in autonomous robot systems, electro-mechanical orthoses and exoskeletons or power tools like the electric loppers, high dynamics and torque in the smallest possible space are central requirements. In addition to the one-of-a-kind power density (rated torque per volume), the high efficiency of the 3890…CR series is also a decisive factor. Thanks to the further development of the commutation system, the motor also achieves high service life values even with extremely heavy loads. The coreless rotor also ensures cogging-free, precise synchronisation with very low energy consumption. In short: the 3890…CR series offers everything required for use in challenging power applications.The new 3890…CR DC-Motors series is available as standard with four nominal voltages: 18 V, 24 V, 36 V and 48 V. A continuous torque of up to 224 mNm is thereby achieved as well. The short-term torque, required for many applications, is much higher. With no-load speeds of just over 5,000 rpm, the motors are optimally tailored to combination with FAULHABER Precision Gearheads. The standard drive can be combined with an IE3-1024 (L) three-channel encoder or optionally with optical encoders from the HEDx series for applications with precise speed controllers or positioning tasks.

italia

Planetary Gearheads series 17/1

Dienstag, 23 Dezember 2014

Planetary Gearheads series 17/1

Thanks to the sturdy construction, FAULHABER metal Planetary Gearheads are ideal for applications which demand the highest torque. The new 17/1 Precision Gearheads are an addition to the FAULHABER gearhead product line in the 16 to 20 mm diameter range and are available with up to five gear speeds with standard reductions of 3.33 : 1 to 1,367 : 1. The 17/1 series, with a diameter of 17 mm, stainless steel housing as well as steel and hard metal Planetary Gearheads and pins, is designed for continuous torque of 550 mNm and short-term loads of up to 800 mNm. Sintered bearings ensure axial shaft clearances under 0.1 mm. With the version with pre-loaded ball bearing, this can be reduced completed to 0 mm if necessary. The operating temperature range is between +100 and –30 °C by default. The gearhead is also available as a low-temperature model for down to –40 °C.

italia

Motor with EtherCat communication

Dienstag, 23 Dezember 2014

Motor with EtherCat communication

The two companies Dr. Fritz Faulhaber GmbH & Co. KG from Schönaich Germany and Technosoft SA from Neuchâtel Switzerland have combined their skills and knowledge to produce one of the world’s smallest Intelligent Motor’s for speed and position control with EtherCAT communication, which complies with CoE (CAN application protocol over EtherCAT). The motor is based on the highly successful 32....BX4 Brushless DC 4 pole technology Servomotors using the system FAULHABER® ironless stator, a dynamically balanced rotor, resulting in a no cogging output, which is ideal for low inertia loads. The controller is of modular design and compact construction for high reliability and incorporates the iPOS4808 controller which utilises the Technosoft MotionChip™ technology and offers 7 I/Os. The configuration, tuning and local programming of the iPOS drive can easily be done using Technosoft’s powerful graphical platform EasyMotion Studio. The position sensor is absolute single-turn providing 4096 counts per revolution for accurate speed and position control, down to 5 arc minutes. Alongside the EtherCAT version there are two CAN versions. The standard CANopen in accordance to the CiA 301, 305 and 402 profiles and The TMLCAN protocol. TML (Technosoft Motion Language) opens the possibility to use the powerful motion controller, allowing it to operate as an independent intelligent device. As an example, to customise any homing routine to match the application needs. Stand-alone single or multi-axis applications with communication between drives without the need of a CAN master is possible while various types of CAN masters are as well supported with an extended set of Technosoft Motion Control Libraries. This Intelligent Motor has a maximum speed of 6,000 rpm and a stall torque of 97mNM, which is achieved from a motor with a diameter of 32mm and the maximum length of the integrated unit is a mere 92.8mm. The controller is housed in an oblong, which is 46.5mm x 67mm, with a depth of 26mm. There are six families of Faulhaber Gearheads that are available for fitting to the motor, depending on the requirements of the application. An Intelligent Motor can be used in many applications, but it has been developed for medical analysis and dosing machines, pick and place and welding robots, instrumentation and optical equipment, unmanned military vehicles, packaging bottling and labelling machines.

italia

MCST 3601 drive electronics for stepper motors

Montag, 22 Dezember 2014

MCST 3601 drive electronics for stepper motors

Searching the multitude of available programmable motion controllers for a controller that is ideally suited to miniaturised stepper motors with phase currents of sometimes less than 100 mA was once a real challenge. The MCST 3601 series has now emerged from the cooperation between FAULHABER and Trinamic GmbH, the motion controller specialist for stepper motors. This controller is compact and flexible and, above all, is perfectly suited to the whole range of FAULHABER micro stepper motors. The series, which is equipped with a microcontroller and a driver, can precisely regulate phase currents from 10 mA to 1.1 A and, at the same time, can be operated with a supply voltage that can vary between 9 and 36 VDC. Thanks to simple and fast communication with a PC via USB 2.0, all types of movements can be programmed using the available software. The ten inputs and outputs also allow external variables to be taken into consideration. Since the controller is designed as a test electronics system, users can adopt the predefined architecture according to their requirements and integrate the components in the platform of their specific industrial application.Furthermore, the MCST 3601 series can actuate stepper motors in micro stepping mode. In this operating mode, up to 256 micro steps can be programmed per full step. This allows the resolution of the controlled rotary or linear movement to be increased considerably and/or the vibrations caused by the motor to be reduced. This possibility will be welcomed in optics applications in particular as here work is performed at resolutions in the micrometre range.

italia

Brushless DC-Servomotor Series 2057...BHS

Montag, 22 Dezember 2014

Brushless DC-Servomotor Series 2057...BHS

The new FAULHABER 2057…BHS are designed to address the specific requirements of the medical and dental hand piece markets. The high efficiency slotless design features smooth speed control with a wide continuous duty speed range up to 40000 rpm while remaining cool to the touch. The motors are capable of handling intermittent overload conditions to address highly dynamic motion over shorter cycle times. Low vibration which reduces user fatigue and low audible noise are ideal for long periods of use in sensitive medical and dental patient environments. The new motors come standard with digital hall sensors and analog hall sensor feedback is available on request. This option is ideal to eliminate the need for an additional encoder for slower speed operation for dental implant or endoscopic positioning applications which can also significantly reduce cabling complexity within the handpiece itself. Preloaded ball bearings insure that the motors are able to withstand the radial (22N) and axial loads (75N) in a hand piece. The extremely long service life can be extended even more through the easy replacement of the front bearing.A wide variety of high precision gearheads, high resolution magnetic and optical encoders and drive electronics are available in order to complete the drive system.

italia

Brushless DC-Servomotor Series 3274...BP4

Montag, 22 Dezember 2014

Brushless DC-Servomotor Series 3274...BP4

In the fight for high performance with minimum weight, FAULHABER with the development of its series3274 BP4 has put a new champion in the ring. The brushless DC servomotor, measuring 32 mm in diameter and 74 mm in length, has a huge continuous torque of 165 mNm. Furthermore, it weighs in at just under 320 g, which is half that of conventional motors with comparable power.The four-pole brushless DC servomotor is ideal for applications in which high power and dynamic start/stop operation with the lowest possible total weight is an important factor, for example in link drives of humanoid robots, electric grippers used in process automation or high-performance traction drives used in inspection robotics. The 3274 BP4 is overload-resistant and operates without wear-prone mechanical commutation. As a result, its operational lifetime is many times longer than that of a conventional DC micromotor. The slope of the motor characteristic curve is just 3 rpm/mNm with a stall torque of 2.7 Nm. The 3274 BP4 can reliably deliver what the application demands even under the harshest ambient conditions, such as at low temperatures or high mechanical loads (e.g. in aerospace applications). This is made possible by, among other things, a robust stainless steel housing and the omission of adhesives which are otherwise usually used for assembly.One particularly interesting feature of this motor series is the high flexibility in its design. The FAULHABER series 3274 BP4 is equipped as standard with digital hall sensors. High-resolution optical and magnetic encoders can be attached simply to the rear multifunction flange. As an option, the motor is also available with analog (linear) hall sensors that can replace an encoder in many application cases. Finally, a large selection of performance-optimised precision gearheads rounds off the complete drive system.

italia

Stepper motors series FDM0620

Montag, 22 Dezember 2014

Stepper motors series FDM0620

With the new FDM0620 series, FAULHABER presents a stepper motor with minimal size: contained in a housing measuring just 9.7 mm in length and 6 mm in diameter are all components (including the connections) - this motor thereby sets new standards in the area of compact drive systems. With this combination of minimum space requirements and maximum power, reliability and production quality, FAULHABER continues its success story in the field of miniaturised drives and expands its family of stepper motors in the diameter range from 6 to 22 mm with another member. With a holding torque rating of 0.25 mNm and a dynamic torque of up to 0.2 mNm, these stepper motors are predestined for applications in which high power is required in a small space – such as with portable devices. The open-loop operation enables fast and simple implementation, the holding torque rating and the precise angular accuracy make this product the ideal solution for applications with high requirements on angular and linear positioning, particularly in optics, photonics and medical technology.The innovative and patented flex PCB system is suitable both for LIF plugs with grid dimensions of 0.5 and 1.0 mm as well as for wiring via lead wires. A wide selection of metric lead screws for linear movements as well as a planetary gearhead with various reduction ratios round out the configuration options of the FDM0620 series.On request, numerous other modifications are available with which the motors can withstand special mechanical loads or environmental influences (e.g., low temperatures or vacuum). This makes the FDM0620 series a flexible solution for a wide range of application areas.Ideal for positioning tasksDynamic torque to 0.2 mNmSpeed to 20,000 rpmOperating temperature range: -35 to +70°C (in the standard version)Long service lifeCan be combined perfectly with gearheads or lead screws

italia
Finden Sie mehr heraus!