Ad Hoc Solutions


Scroll the page to find out something more
  • MIL motor with integrated drive

    Solution designed following a request for a motor with integrated electronics able to operate in harsh environments at an operating temperature of -32°C.

    The motor is also equipped with a permanent magnet brake and an absolute multi-turn encoder.

    The engine is connected to complex kinematics to achieve the desired final movement.

    • Rated voltage: 24VDC
    • Degree of protection: IP65 MIL-STD-810G
    • Temperature range: -32°C + 75°C (MIL-STD-810G)
    • Rated torque: 1.75Nm
    • Rated speed: 3000 RPM

  • Slip Rings for Wind Turbines

    Slip rings for wind turbines, designed for installation between the tower and the nacelle.

    The need for compact size and easy installation was met by fitting specific connectors.

  • MIL gearmotor

    Solution designed to meet the need for an extremely low backlash motor + gearbox assembly for drive directly on the vertical shaft with no intervening gearing.

    Dimensions are further reduced by a 90° configuration with two cascade-mounted gearboxes.

    • Rated voltage: 36VDC/650VDC
    • Protection rating: IP66 MIL-STD-810G
    • Temperature range: -32 °C + 75 °C (MIL-STD-810G)
    • MTBF > 20,000 h
    • Rated output torque: 5,000 Nm

    • Rotary Joint with Encoder

      Solution designed to meet the need to carry electrical signals and power from a fixed base to a continually rotating antenna. The customer also needed to be able to read the antenna's position. Servotecnica offered a combined system of Slip Ring + Zettlex Inductive Encoder, resistant to shocks, vibrations and severe environments.

      Main Characteristics:

      • Slip Ring
      • IP65
      • 91 circuits
      • Ethernet, RS422, power and signals
      • Absolute Encoder
      • Resolution up to 22 bit/rev
      • SSI / BiSS / TTL protocols

    • Integral hollow shaft servomotor

      Motor with hollow shaft and integral double-layer electronics for motor control and auxiliary user I/O.

      Motor:

      • Flange: ⧠32 mm
      • Through hole: 6 mm
      • Encoder: 4000 ppm
      • Power output: 50 W
      • Electronics
      • Layer 1: drive
      • Layer 2: Auxiliary user I/O

    Ready to find out more?